webpage-location

Specifies the location of the Web pages used for authentication. These pages can either be hosted on the system or on an external Web server.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

webpage-location [advanced|external|internal]

Parameters

webpage-location [advanced|external|internal]


advanced	Uses Web pages for login, welcome, failure, and terms created and stored on the controller. Select advanced to use a custom-developed directory full of Web page content that can be copied in and out of the controller, service platform, or access point. If selecting advanced, enable the webpage-auto-upload option to automatically launch the advanced pages to requesting clients upon association. For more information, see webpage-auto-upload.
external	Uses Web pages for login, welcome, failure, and terms located on an external server. Provide the URL for each of these pages.
internal	Uses Web pages for login, welcome, and failure that are automatically generated

Examples

nx9500-6C8809(config-captive-portal-test)#webpage-location external

nx9500-6C8809(config-captive-portal-test)#show context
captive-portal test
 access-time 35
 custom-auth info bob bob@examplecompany.com
 connection-mode https
 inactivity-timeout 750
 server host 172.16.10.9
 simultaneous-users 5
 terms-agreement
 webpage-location external
 use aaa-policy test
nx9500-6C8809(config-captive-portal-test)#

Related Commands


no	Resets or disables captive portal Web page settings
webpage	Configures a captive portal‘s Web page (acknowledgment, agreement, login, welcome, fail, no-service, and terms) settings
webpage-auto-upload	Enables automatic upload of advanced Web pages on a captive portal